Adding Multitool 3d Printer Profile to Prusa Slicer
In order to properly slice for the new 5 tool Prusa XL printers, you will need to add the printer as a preset to your Prusa Slicer software. To do this:
- Open Prusa Slicer
- Locate the Printer pull down on the right.
- Click the Gear Icon on the right and choose Add/Remove Presets
- The Configuration Wizard will load. Click the Prusa Research section.
- Scroll down until you find the XL Multitool Family section. Select the 0.4mm Nozzle option on both the 2T and 5T models.
- Click Finish at the bottom right. The presets will be added.
- To print to the new printer, choose the Original Prusa XL - 5T Input Shaper 0.4 nozzle option in the printer.
You are now ready to slice and print in the new XL printer
DataImage5.png
DataImage9.png
DataImage7.png
DataImage86.png
| Files | ||
|---|---|---|
|
|
DataImage5.png
42 KB
|
|
|
|
DataImage9.png
10 KB
|
|
|
|
DataImage7.png
5 KB
|
|
|
|
DataImage86.png
170 KB
|